GE OEC One CFD C-Arm

GE OEC One CFD C-Arm System – All-in-One Mobile Fluoroscopy with CMOS Flat Panel Detector

The GE OEC One CFD is a compact all-in-one mobile c-arm designed for facilities that need advanced surgical imaging in a streamlined format. Built around a CMOS flat panel detector and a connected one-piece design, the system is intended to deliver detailed anatomy visualization, practical mobility, and efficient workflow across a wide range of procedural settings.

Designed for both image quality and usability, the GE OEC One CFD combines 1:1 image detail from detector to display, 1.5k x 1.5k image processing, a 4K 27 inch UHD monitor, Live Zoom, and an integrated OEC Touch control panel. Its small footprint, five-minute standby power, and positioning aids help support efficient imaging in tighter spaces such as smaller ORs and pain management rooms.

Key Features of the GE OEC One CFD C-Arm System

CMOS Flat Panel Detector Imaging

The GE OEC One CFD uses a 21 cm CMOS flat panel detector designed to provide clear anatomical detail with full resolution at full frame rate. The system is built around a Clear View image chain that transfers detector data to the display for 1:1 image detail, helping clinicians visualize anatomy more clearly during procedures.

1.5k x 1.5k Image Processing

This system uses 1.5k x 1.5k image processing to support higher detail visualization. The platform is designed to process more data from detector to display, helping maintain strong image clarity for procedural imaging and fine detail review.

4K 27 Inch UHD Display with Squircle Imaging

The OEC One CFD includes a 4K 27 inch UHD image display monitor and shows large 11.8 inch Squircle images. The image format is designed to preserve 100 percent of the image when rotated, helping clinicians maintain full image information during repositioning and review.

Live Zoom and Fluorostore

The system includes Live Zoom, which allows users to digitally zoom up to 4x on anatomy during live fluoro without changing x-ray technique. It also includes Fluorostore, allowing clinicians to review the most recent exposure again and save prior frames as new static images to help reduce retakes and improve workflow efficiency.

All-in-One Compact Design

The GE OEC One CFD is built as a one-piece all-in-one c-arm with a small footprint designed for tight spaces and smaller operating rooms. By combining the display and imaging system into one compact platform, it helps reduce crowding and streamline workflow in busy clinical settings.

OEC Touch Workflow Control

An integrated OEC Touch control panel mirrors the live image and supports synchronized workflow between the surgeon and the operator. The control panel allows quick image adjustments, zoom, pan, rotation, and access to commands such as Live Zoom, Digital Pen, Fluorostore, and optional laser aimers.

Planning and Positioning Tools

The system includes Digital Pen for outlining anatomy or devices of interest on screen, along with distance and angle measurement tools and annotation capabilities. Positioning features include color-coded radial dial brakes, long c-arm handles, optional green laser aimers, and extended reach with 55 degrees of overscan and 95 degrees of underscan.

Flexible Clinical Configurations

The GE OEC One CFD is offered in three procedural configurations to match different clinical demands. These include a Standard Offering for general and orthopedic procedures, a PM Care configuration for pain management with fluoro replay using Fluorostore, and a Vas 25 configuration designed to visualize guidewires as small as 0.014 inch in peripheral vascular procedures.

Dose Management and Power

The system includes a finger-removable anti-scatter grid and a low dose mode to support dose-conscious imaging. It is powered by a 2.5 kW generator with 40 kHz frequency and Smart Technique heat management, supporting dependable imaging performance in active procedural settings.

Image Storage and Connectivity

The OEC One CFD supports storage for up to 150,000 images and offers wireless options for footswitch, DICOM, and printing in supported configurations. These features help integrate the system into broader surgical imaging and documentation workflows.

Standby Power for Transport

The system includes five-minute standby power designed to protect data and allow quick room-to-room transport without restarting. This can be especially useful for facilities that need to move efficiently between procedures.

Ideal Clinical Applications

The GE OEC One CFD is well suited for orthopedic procedures, spine imaging, general surgery, urology, pain management, and vascular applications. These procedural areas are specifically identified in the product literature as key use environments for the system.

Why Choose the GE OEC One CFD C-Arm System?

The GE OEC One CFD is a strong choice for facilities looking for a compact flat panel mobile c-arm with detailed image quality, synchronized workflow tools, and flexible procedural versatility. Its combination of CMOS detector technology, Live Zoom, all-in-one design, OEC Touch controls, and advanced planning features makes it well suited for surgery centers and hospitals that need efficient imaging in space-sensitive environments.

The GE OEC One CFD C-arm system is an all-in-one mobile fluoroscopy system designed for surgical imaging in compact procedure rooms and operating suites. It combines a small footprint, integrated display, connected control panel, and flat panel detector technology to support real-time imaging across a wide range of procedures. GE positions the OEC One CFD as a compact C-arm that helps clinicians see more anatomy, do more in tight spaces, and streamline workflow.

In the GE OEC One CFD, CFD refers to the system’s CMOS flat panel detector technology. The brochure highlights a 21 cm CMOS flat panel detector that delivers 1:1 image detail from detector to display and supports full resolution at full frame rate. This flat panel design is intended to provide better image quality at low dose compared with a-Si detectors.

The GE OEC One CFD is designed as a one-piece, all-in-one C-arm that helps optimize space in smaller procedure rooms, pain management offices, and crowded ORs. The integrated design reduces clutter, while the connected OEC Touch control panel mirrors the live image and allows quick image adjustments, zooming, panning, rotation, and access to tools such as Live Zoom, Digital Pen, and Fluorostore.